Decide where you want to mount the cable. Be sure it’s a spot where you have easy access t
It's an eventual truth that at some point you're going to get tangled up with another car or with the wall. When that happens, you'll need to be pulled off the wall, another car, or the track. Being prepared can be extremely helpful to track workers, can help shorten cautions, and keep the show moving along. Allstar Performance has made being prepared cheap and easy with its Bumper Hookup Kit.
The kit (PN ALL22315; $8.95) consists of 3 feet of cable and cable clamps to secure it. Ideally, you'll want two, one for the front bumper and one for the rear. The kit is super easy to install and literally takes less than 5 minutes start to finish. We recently installed one of these kits on City Boy, our Mini Stock project. Follow along as we show you how it's done.
Route the cable through the top and bottom holes. Wrap the cable around the bumper (not ju
Using the supplied clamps, secure the cable to itself.
That’s it! In the event of a wreck or break down on track, track workers can quickly and e