New Digital Capacitive Discharge Ignition
Modotek Performance’s new DCDI digital capacitive discharge ignition is suitable for most four-, six-, and eight-cylinder applications. Capable of 135 mJ of spark energy output, you have the ability to digitally set different rpm limits with 100-rpm steps from 3,000 to 10,900 rpm. The DCDI is capable of many types of timing curves as well, ranging from straight-line to 3D maps, and has the capability to data log. It comes with a matched external coil and draws less than 5 amps at 8,000 rpm. It’s fully compatible with MSD distributors or magneto setups. At an MSRP of $679.95 it’s priced very competitively and comes with easy-to-follow installation instructions fully supported by an actual tech department. For more information contact Modotek at 440/352-0100 or visit www.modotek.com
Adams Pumps, a premier manufacturer of high-performance water pumps for the racing industry for more than 20 years, now offers a high-performance twin diffuser pump specifically designed for small-block GM crate motors. With its lightweight 356-T6 aluminum casting, innovative six-vane billet impeller, and custom-made ultradurable seal, this pump will improve coolant flow, increase pressure, and give a 2-5 horsepower gain over standard pumps. For more information contact Adams at 704/663-1905 or visit www.adamspumps.com
AMSOIL Expands Signature Series Line
As racers we have to tow our cars to the track and one of the best oils for your tow vehicles is AMSOIL’s newly expanded Signature Series line which includes 0W-20, 5W-30, and 10W-30 Synthetic Motor Oils joining the established 0W-30. The new Signature Series line features all-new packaging and represents the very best motor oils AMSOIL has to offer, allowing you to take advantage of maximum extended drain intervals. These Signature Series oils are recommended for drain intervals of up to 25,000 miles/one year, whichever comes first (15,000 miles/one year in severe service conditions).
With the recent introduction of AMSOIL OE Synthetic Motor Oil—made for original equipment manufacturers’ recommended drain intervals—and the recent reformulation of XL Synthetic Motor Oil—made for twice-a-year oil changes—the AMSOIL Signature Series with its 25,000-mile or one year oil change offers three distinct lines of high-quality synthetic motor oil, appealing to every customer’s need.
For more information about AMSOIL synthetic lubricants and performance products contact your nearest AMSOIL distributor, visit "www.amsoil.com, or call 800/777-8491.
Keyser’s Port City Racing has just introduced this newly manufactured 2-inch drop shock mount. It’s precision machined to fit all popular shocks and chassis shock brackets. This aluminum mount includes a spacer and is engineered, designed, and manufactured in-house at the company’s Michigan headquarters. For more information, contact Keyser’s Port City Racing at 800/472-2464 or visit www.portcityracing.com
See-Through Oil Filter Assembly
Billet Connection has developed a new patent pending Billet Aluminum Oil Filter Assembly. This new filter assembly allows the user to inspect the filter element without draining or leaking any oil, unbolting or loosening any fasteners or fittings, and without losing any oil out of the oil system. This can be done in seconds after the engine is shut off, even when filtering non-transparent fluids like engine oil.
This filter assembly allows the user to visually see the filter element and the contaminants and particles that have been filtered out of the oil system. This helps to determine if the contaminants and particles are from normal use or from bearings or other components excessively wearing in the engine. This filter also allows a visual inspection of the oil pumping through the filter to determine the condition of the oil.
Callies has just introduced its affordable (High Value) Ultra H-beam connecting rod. Ultra H-beams are machined from extremely clean Timken steel, from start to finish in its Ohio facility. Current offerings include popular SBC, LSX, and BBC applications. These rods are fastened with purpose-built 260Ksi Ultra bolts, produced by ARP, specifically for Callies. Design, material, and craftsmanship combine to make the rod capable of handling up to 1,200 hp. The Ultra H-beam is designed not only to be affordable, but also to provide racers with many years of service and durability. For more information and availability, contact Callies at 419/435-2711 or visit www.callies.com