Comp's Break-In Oil
Engineers at Comp Cams and Endure Performance Lubricants have been working hand-in-hand to develop a full line of auto-motive lubricants, the first being Comp's ZDDP-enhanced Engine Break-In Oil.

The new Break-In Oil provides maximum protection during initial engine break-in and was heavily tested by the Comp Cams R&D team. This advanced lubricant provides maximum engine life while also allowing motors to reach their full performance potential. The specially formulated oil improves the surface mating of valvetrain components (especially flat tappets), the rotating assembly, rod journals, piston rings, valve guides, and other vital areas of the engine. For more information please visit

Eliminate Ethanol Problems
CRC Industries has introduced a revolutionary new fuel additive that stops the damage caused by ethanol before it starts. CRC Phaseguard4 Ethanol Fuel Treatment provides the maximum protection available for E10 to E85 fuel and helps prevent phase separation-the No. 1 cause of ethanol fuel related problems. In gas engines, enthanol can degrade gaskets, glues, and rubber components while also loosening varnish and corrosion deposits-all of which then clog fuel filters, injectors, and intake valves, leading to major (and costly) damage to engines. Phaseguard4's 4-in-1 formula protects against corrosion, cleans the entire fuel system, stabilizes fuel for daily use as well as long-term storage, and restores power and mileage potential. For more information please visit

From Pits To The Infield
Yamaha's new EF2000iS Generator is the perfect power source for a weekend of racing.

The lightweight, fuel-efficient generator provides up to 2,000 watts of power in a quiet, long-running device with a new retro-modern design. Weighing in at only 44 pounds, this machine has enough power to run lights and the air conditioning unit in even bigger trailers for 10 hours on just one gallon of gas. For more information contact Yamaha at 1-800-88-YAMAHA or visit

Dry Breaks
Stäubli Corporation, manufacturers of high-performance dry break couplings and connectors is launching a new dry break line for motorsports applications. The new RMI line of dry breaks will be offered in line sizes from -6 to -16 AN and are manufactured with high-strength aluminum casings and offered with seals that are compatible with water, hydraulic, and engine oil. For more information please visit