Port City Racing's new Deluxe Inflation Unit is designed to be used with Schrader Valve Shocks and features a gauge range of 0-300 psi. The unit comes with a custom-fitted protective case but the really cool feature we like was that the Schrader fill valve swivels a full 360 degrees. It also has a precision bleeder valve and an anti-air loss connector. The Deluxe Inflation Unit carries a racer price of $82.50. For more information contact Port City at 800/472-2464 or visit www.portcityracing.com.
Lock Your Bolts
Quit leaving your header bolts on the racetrack with the new Split-Lock Fasteners from Percy's High Performance. The Missouri-based company uses only premium, quality material in the USA based manufacture of these fasteners.
Percy's new, reusable, Split-Lock fasteners are available in black oxide or stainless steel and are simple to install. Just tighten the bolt, then tighten a small set-pin which expands the bolt threads against the thread wall providing an unmatched lock. No clips, small wires, or other small pieces to go flying to the dark side of the engine compartment either.
For more information contact, Percy's High Performance, Inc. at 573/346-4409 or visit www.percyshp.com.
Watch your Step-n-Tow
The name pretty much says it all. The Step-n-Tow is a versatile, hitch-mounted step that allows easy access to the bed of pick-ups and SUVs. From the durable galvanized, powdercoated finish to the 18-inch, 90 degree swing-out safe, non-skid rubber foot step, this product fits any standard 2-inch receiver, and is ideal for the racer towing with a hitch.
The Step-n-Tow can also act as a versatile winch mounting platform with the addition of the winch mounting block (PN 72251). This system will satisfy any standard two-bolt mounting pattern with winches up to a 3,000 pound capacity. For more information visit www.stepntow.com.
Day Motor Sports now offers a quality, aluminum Break Away Spoiler Kit. It's made of 0.080-inch aluminum and comes with two side boards, one center support, four angle adjusters, piano hinge, and rear angle brace. Available in 5-inch for Modifieds at $149.99 and also 8-inch for Late Models at $169.99. If you happen to brush the wall and only need the right side, replacement parts are available separately. For more information contact Day at 800/543-6238 or visit www.daymotorsports.com.
Utilizing years of valvetrain design experience, the latest FEA stress analysis technology and an exhaustive testing regimen (dyno & Spintron), the Comp Cams engineering team performed a "clean sheet" redesign of its popular Ultra Pro Magnum Rocker Arms. The redesign centers around the nearly unbreakable investment cast 8650 chrome-moly body with an arched, web-like design that delivers a nearly 29 percent increase in strength and rigidity while reducing the moment of inertia and optimizing the dynamic balance. For more information contact Comp at 800/999-0853 or visit www.compcams.com.