Circle Track Magazine Homepage Circle Track
Facebook

Pushrod Length Keith Dorton Covers The Valve Stem Tip With A Sharpie

Prev  Next
 
Pushrod Length Keith Dorton Covers The Valve Stem Tip With A Sharpie
Pushrod Length Keith Dorton Covers The Valve Stem Tip With A Sharpie
Engine builder Keith Dorton of Automotive Specialists begins the process by covering the valve stem tip with ink from a Sharpie. This will be worn off when the rocker makes contact with it after just a few revolutions of the crank. You can also use machinist's dye. View Related Article
Pushrod Length Stud Mounted Rocker Pushrod Length Keith Dorton Covers The Valve Stem Tip With A Sharpie Pushrod Length Testing Pushrod Length Wear On The Ink Is Too High Pushrod Length Proper Wear Location Pushrod Length Comp Cams Checking Pushrod Pushrod Length Proper Wear Location
Pushrod Length Side Rocker And Valve Tip View Pushrod Length Rocker Studs Pushrod Length Different Rocker Arms Pushrod Length Shims For Shaft Mount Pushrod Length Checking Gauge Pushrod Length Correctly Shimmed
Circle Track
Circle Track