Circle Track Magazine Homepage Circle Track

139 0304 Meas 10 Z

Prev Next
For standard A-arms, the "pivot" point will be at the center of the control arm shaft. This point represents the average height of the two mounting bolts (when anti-dive is present) as well as the width of the rotational axis.
Front Moment, Roll - Stock Car Measurements, Part I

 For standard A-arms, the "pivot" point will be at the center of the control arm shaft. This point represents the average height of the two mounting bolts (when anti-dive is present) as well as the width of the rotational axis.  View Related Article

 

Get Adobe Flash player