Circle Track Magazine Homepage Circle Track

139 0304 Meas 8 Z

Prev Next
For strut-type lower control arms that are mounted using Heim joints, use the center of the Heim joint that is inline between the ball joint and a perpendicular line to the centerline of the car. For stock-type GM lower control arms, use the front bushing. This point is very near the same perpendicular line.
Front Moment, Roll - Stock Car Measurements, Part I

 For strut-type lower control arms that are mounted using Heim joints, use the center of the Heim joint that is inline between the ball joint and a perpendicular line to the centerline of the car. For stock-type GM lower control arms, use the front bushing. This point is very near the same perpendicular line.  View Related Article

 

Get Adobe Flash player