Digital Caster/Camber Gauge Intercomp's lightweight, aluminum, digital, high-performance caster/camber gauge indicates to 0.1 degrees and has +/- 20 degrees caster/camber reading with a back light for low-light situations. This gauge's accuracy is 10 times greater than traditional bubble gauges. It's easy-to-use controls include on/off, caster/camber select and zero making it simple and quick. A standard 9-volt battery gives up to 100 hours of power. Auto shutoff and self-leveling camber are standard. MSRP: (PN100005) Magnetic Adapter & Case, $299; (PN100008) Case (No Adapter), $249. Intercomp, Dept. CT07, 14465 23rd Ave. N., Minneapolis, MN 55447; 800/328-3336; www.intercomp-racing.com
Ride Height A great way to obtain fast and accurate heights without lying on the ground and getting dirty, the Wedge-It will check height requirements on either dirt or asphalt race cars. It will measure ride height from 331/48 to 711/42 inches to the nearest sixteenth of an inch. Just position the Wedge-It under the desired location to measure the ride height, press the button to release the pointer and release the button when it contacts the frame. The Wedge-It is constructed of durable ABS plastic resin with the ride-height measurements molded into the plastic, making it easy to read. MSRP: $34.95. Innovative Designs & Hayes Motorsports, The Wedge-It, Dept. CT07, 866/565-4999
Adjustable Water Pump Adjusts Belt TensionColeman Racing Products' new adjustable water pump is designed to make life easier for the engine builder and racer. This completely redesigned pump features a billet aluminum bearing housing that is machined on an eccentric angle to allow the installer to accurately adjust the belt. It works on cog belts, HTD belts and v-belts. This pump also features a heavy-duty cast aluminum body that is CNC-machined to exact tolerances, impressed to seal from any leaks and then hard-coated to protect the housing under the harshest conditions. It includes a sealed heavy-duty bearing assembly with a three-quarters-inch shaft and a steel fan arbor with dual-bolt pattern. The high-flow aluminum impeller was also redesigned to keep a steady flow rate. MSRP: (PN 12190) $295.95. Coleman Racing Products, Dept. CT07, N-1597 U.S. 41, Menominee, MI 49858; 800/221-1851; www.colemanracing.com
Gauges Panels Longacre's new line of engine instrument panels, the Sportsman and Radial Pro, are designed to help keep your cost under control without sacrificing quality. These high-quality 251/48-inch mechanical gauge panels come pre-wired with "Fat" wiring and soldered terminals. Warning lights and all sensors are included. These new AccuTech Sportsman gauges come in a steel case and have quality-built mechanisms, solid brass gears, fully soldered connections and are easy to read. They are hard-mounted on an aluminum panel, making them ready for installation. The Radial Pros have the same features as the Sportsman but are also wrapped in aluminum and mounted on carbon fiber panels to keep the weight at a minimum. Both gauges carry a full-year warranty. MSRP: Prices start at $114.95. Longacre Racing Products, Inc., Dept. CT07, 14269 N.E. 200th St., Woodinville, WA 98072; 425/485-0620; www.longacreracing.com