This photo was taken at the...
This photo was taken at the 2008 24 Hours of Daytona in the Grand Am GT Division. RubbnRepair is a sponsor of the 27 O'Connell Racing team for the 2008 season. The RubbnRepair patch is barely noticeable. Can you find it? Photos provided by RubbnRepair
Rubbn'Repair is an advanced structural repair system for the racing and automotive industries. It is a quick, easy-to-use, effective high performance patch for fenders, hoods and body panels.
RR is unique in that it has shape-changing flexibility as well as structural strength. Designed as an alternative to duct tape, the patch material is a high-strain fabricated shape memory polymer resin matrix with an extreme performance, industrial strength adhesive on one side.
When heated above its activation temperature, RR is rubbery and moldable. It can be folded, bent, stretched and even trimmed. When cooled, RR is stiff and structurally strong providing support for the damaged area. The patch is water resistant, will not degrade or crumble, requires no long curing period and contains no chemical irritants or fumes.
Applying the patch is as easy as removing the adhesive backing, holding the heated patch over the damaged area and waiting 20 seconds until it cools and becomes rigid. RR can be reheated and reshaped many times before it is applied.
Here it is, between the wheel...
Here it is, between the wheel well and the headlight. The patch is formed fitted and trimmed onto the fender. Its ability to conform to curved shapes makes it ideal for repair where strength and rigidity is essential. Photos provided by RubbnRepair
Repairs in 15 seconds or less
No surface preparation necessary
Strong bond to vehicle
Molds rapidly to a variety of shapes
Much stronger than duct tape
Varied heating methods
No curing required
No chemical irritants
Can be cut, sanded, drilled and painted
The patches come in various sizes that include 2, 6, 12 and 18 inch widths, or custom sizes.
O'Connell Racing crew chief Roy Mongmonery of the 27 Porsche said, "We were able to install "Rubbn'Repair" on the right front fender (a very critical aero and support area). We had amazing results. The product was pliable enough that I was able to shape the exact contour of the fender. We were then able to trim the product to an exact fit. Once the product set up it became rigid and was a permanent part of the car and was as good as the original fender." President of O'Connell Racing, David Rifkin, said, "We are very happy that we had your product, we would have DNF'd for sure."
Rubbn'Repair has also been used on Sprint Cars, and Rubbn'Repair is a sponsor in the Mid-West All Star Series as well as the All Star Circuit of Champions.
More information about this product, contact CRG Industries, LLC at 866/341-2744 or go to their website: www.rubbnrepair.com.