Circle Track Magazine Homepage Circle Track

P147714 Image Large

Prev Next
If you can get to clean metal, a plasma cutter is the trick. It cuts quickly and cleanly. The sheetmetal was also tack-welded to the frame underneath, so once we cut a piece out, we had to break the welds loose with a hammer and pry bar.
In the Beginning There Was...Junk

 If you can get to clean metal, a plasma cutter is the trick. It cuts quickly and cleanly. The sheetmetal was also tack-welded to the frame underneath, so once we cut a piece out, we had to break the welds loose with a hammer and pry bar.  View Related Article

 

Get Adobe Flash player