Hawk Performance Brake Systems
Hawk Performance recently announced the release of its new Performance Brake System, including three-piston calipers, rotors and pads. This new system includes a matched set of precision components made to increase a vehicle’s braking performance for substantially enhanced stopping power.
Featuring a fast, easy install utilizing OEM mounting points with no drilling, welding or fabricating required, these systems may be a perfect match for race series where aftermarket braking systems are allowed. This represents a significant cost savings over other “big-brake” kits. At the heart of the system is the new Talon three-piston caliper constructed of billet-aluminum. This new three-piston Talon caliper is the key to upgrading your brakes while retaining stock mounting points and avoiding clearance issues.
For more information, visit www.hawkperformance.com or find them on Facebook at www.facebook.com/hawkperformance.
Smoke Shark Helmet
Simpson’s newest helmet model, the Smoke Air Inforcer Shark was designed for and is currently the helmet of choice for three-time NASCAR Champion Tony Stewart. Some in the industry say Tony Stewart can race just about anything with wheels, but when it comes to his safety gear, he is particular.
The lightweight protection of a carbon-fiber helmet translates to improved comfort, which influences increased endurance. Simpson’s carbon models address the performance needs of racers in every genre of Motorsports and are trusted by professional racers at the top of the sport.
All Simpson helmets are head and neck restraint compatible. For more info in this or any of Simpson’s safety gear, check out www.teamsimpson.com.
Odyssey Batteries By Enersys
Massive horsepower requires a battery with massive starting power and deep cycle reserve power. The Odyssey Extreme Series battery is built with 99.99-percent pure lead, compression-packed plates, and designed to do both. It delivers twice the overall power and three times the life of conventional batteries. For more information, or to located a dealer, visit www.odysseybattery.com.
Scorpion Racing Products Endurance Series Shaft-Mount Rockers
Scorpion Racing Products recently announced the introduction of its new Endurance Series shaft-mount rocker arms. According to company officials, customers have been asking for Scorpion shaft-mount rocker arms for a few years, and now after exhaustive testing they are available for purchase.
Scott Reynolds, Executive Vice President, states, “Scorpion takes precision manufacturing to a whole new level with its new Endurance Series shaft-mount rocker arms. These rockers were designed for professional circle track, dirt track, drag racing, and offshore powerboat race engines. We believe they are the best shaft rockers available today and are built to perform at the top level, lap after lap, race after race. Plus, they are priced very competitively, and they’re made in America.”
For more information on these, or any of Scorpion’s other valve train components, visit www.scorpionracingproducts.com.
Blair Rotabroach Combo Kit
Blair Equipment Co., Inc. producers of precision sheetmetal holemaking tools and spotweld cutters, introduces a new Rotabroach Sheet Metal Hole Cutter Combo Kit. The new kit (PN 11320) combines two of the most popular kits, the small diameter kit (PN 11090) and the large diameter kit (PN 11091), into one convenient package. Included in the set are 13 sizes of Rotabroach Cutters from 5/16- to 11/2-inch. Rotabroach sheetmetal cutters can drill holes in materials up to 1/4- or 1/2-inch thick depending on diameter. They are ideal for use in all types of automotive and metal fabrication, maintenance and electrical applications, spotweld removal and plugholes for welding. The kit is packaged in a sturdy plastic storage case and includes two arbor assemblies, extra pilots, center punch, washers, and instructions on use. Rotabroach Cutters can be used in most hand-held electric drills and in drill presses.
For additional information regarding Blair products, visit www.blairequipment.com.
Maximize Thermocouple Wiring Length!
Auto Meter is proud to introduce the Incandescent Pyrometer Extension Module. Developed specifically to aid gauge installations requiring maximum thermocouple wiring length. This is an ideal accessory for applications such as overhead mounts, dragsters, buggies, most mid or rear engine vehicles, diesel motorhomes, and more. Adding a Pyrometer Extension Module to any Auto Meter incandescent backlit Pyrometer installation allows for a safe increase in thermocouple wiring length from 10 feet to a maximum of 75 feet without loss of accuracy or response on your gauge!
Maintaining original wiring length on Pyrometers, also known as Exhaust Gas Temperature (EGT) gauges, is critical for optimum performance. Deviation from, or alteration to the thermocouple (sensor) wiring or connectors for these gauges can have a dramatic impact on instrument performance. This issue has previously limited mounting flexibility on a variety of vehicles.
Available now from your local Auto Meter dealer, ask for part number 5256. For more info, visit www.autometer.com.