New Multi-Disc Oval Track Clutch
Ram’s new 6-inch Assault Weapon is engineered to maintain a light rotating mass while providing the best remedy for premature wear associated with small-diameter racing clutches. Available with twin or triple discs, which take advantage of its diameter and thicker sintered bronze metallic friction surfaces, Ram proclaims the Assault Weapon will endure more heat, more abuse, and resist more severe wear than any smaller diameter racing clutch. Full billet construction and of rebuildable design, the Assault Weapon has the ability to disperse high temperatures without distorting the discs.
Comprising flywheel, friction discs, floater plates, pressure plate, spring diaphragm, and cover, the clutch assembly is available with dual (10.1 pounds) or triple discs and with 10 or 26 splines. Ram’s twin- and triple-disc Assault Weapons start at $599. For more information contact Ram at 803/788-6034 or visit www.ramclutches.com.
New Dry-Sump Pulley Locks
The new C-Lok for Drysump oil pump pulleys from KRC Power Steering can hold up to 600 ft-lbs of torque while saving you hours of work and frustration. No keyways or set screws to mess with, you simply tighten one nut, making belt alignment as simple as it can be. The C-Lok won’t freeze up on the shaft so removal is far easier and since there are no set screws there’s nothing there to cause damage to the pump shaft. KRC Power Steering Drysump pulleys come equipped with the C-Lok for 5/8-inch pump shafts. For more information call KRC Power Steering at 770/422-5135.
Affordable Bender Goes Rogue
Rogue Fabrication developed an air-powered tubing bender that has affordable dies! It comes with a built-in degree indicator, your first die set (up to 1.75-inch od), and everything you need to assemble the bender for only $595. All of Rogue’s die sets bend a full 180 degrees, and most are only $199 shipped. When properly equipped, the bender can bend beefy 0.250-inch wall thick 1.75 DOM steel. The bender requires air/hydraulic cylinder (approximately $80) for power, which bends more than 90 degrees in a single cycle. For more information contact Rogue at 503/389-5413 or visit www.roguefab.com.
Longacre Racing Products now offers a pair of easy-to-read and super accurate digital tire-pressure gauges. Designed for use up to 60 pounds, both gauges will display pressures to 1/10-pound with improved accuracy of 0.3 percent. Features include: a battery indicator, auto off to save the battery, and a wider temperature operating range than ever before. You have your choice of either a ball chuck or swivel chuck on the end of the ultraflexible 17-inch hose. In addition, these digital tire gauges come with their own silver case for safe storage. PN 50393 is the ball chuck while PN 50394 is the angle chuck, both carry a suggested racer price of $132.90. For more information, contact Longacre at 800/423-3110 or visit www.longacreracing.com.
Stock Mount Shocks
Integra Racing Shocks and Springs is pleased to introduce the new Steel Body Stock Mount shocks. They are available in all popular valvings and can also be custom valved. The machined billet aluminum piston comes in linear, digressive, linear digressive, and DSP. To comply with sanctioning body rules, these shocks are internally gas charged with no Schrader valve or external gas port (PNs 310 47180 and 310 47140). For more information, call Keyser Manufacturing at 800/472-2464 or visit www.integrashocksandsprings.com.