Circle Track Magazine Homepage Circle Track

Bert Racing Transmission Rebuild Compress

Prev Next
Before it can be reinstalled in the housing, the clutch assembly must be compressed. You can do this with a piece of threaded rod and a few nuts and washers. Make sure that all the clutch plates slide smoothly in the grooves on the inside of the clutch housing so that you don't bend a plate.
Rebuilding a Bert Racing Transmission

 Before it can be reinstalled in the housing, the clutch assembly must be compressed. You can do this with a piece of threaded rod and a few nuts and washers. Make sure that all the clutch plates slide smoothly in the grooves on the inside of the clutch housing so that you don't bend a plate.  View Related Article

 

Get Adobe Flash player