Circle Track Magazine Homepage Circle Track

139 0306 Meas 5 Z

Prev Next
Move camber adjustment shims back and forth from each mounting bolt, orslide the control arm shaft if it is slotted, to adjust the amount ofcaster in each wheel. This will move the upper ball joint forward (toreduce caster) or to the rear (to add caster).
How to: Stock Car Measurements

 Move camber adjustment shims back and forth from each mounting bolt, orslide the control arm shaft if it is slotted, to adjust the amount ofcaster in each wheel. This will move the upper ball joint forward (toreduce caster) or to the rear (to add caster).  View Related Article

 

Get Adobe Flash player