Daytona Sensors supplies everything you need with its CD-1 ignition system—ignition box, coil, noise filter, wiring, software CD, and detailed instructions. The center point of this ignition system is the CD-1 ignition box. From the outside, the box is not much different than other boxes on the market. It’s the capabilities that make this box different. The rev limiter controls are on the outside of the box, along with the mode settings and launch control rpm settings. The CD-1 ignition includes a coil. The output is 135 mJ, yet only draws 5 amps at 8,000 rpm. The coil is sealed and mounted in an aluminum chassis. The helps dissapate heat, while reducing vibration, ensuring reliability. The wiring is as simple as connecting two leads which come off the ignition box.