Circle Track Magazine Homepage Circle Track
Facebook

Shock1 Photo

 
Shock1 Photo
Shock1 Photo
Basic shock design utilizes a shock shaft and piston that must travel through a fluid (shock oil) as the shock cycles through compression and rebound. The fluid travels through low speed holes in the piston and through high speed slots molded into the piston and past valve discs attached to the piston face. View Related Article
Shock1 Photo Shock1 Photo Shock1 Photo Shock1 Photo Shock1 Photo Shock1 Photo Shock1 Photo
Shock1 Photo Shock1 Photo Shock1 Photo Shock1 Photo
Circle Track
Circle Track